Siemens GMA161.1P OpenAir Proportional Spring-Return Damper Actuator with Position Feedback and Plenum Cable
- Regular price
- $285.00
- Sale price
- $285.00
- Regular price
-
Couldn't load pickup availability
Product Description P/N: GMA161.1P
Description
The Siemens GMA161.1P is a proportional electric spring-return actuator for positioning HVAC dampers. It provides 62 lb-in of torque, accepts a 0–10 VDC control signal, and returns mechanically to its configured position when supply power is removed.
Technical Specifications
| Condition | New/Never Used Surplus |
| Brand | Siemens |
| Category | HVAC Controls |
| Part Number | GMA161.1P |
| Subcategory | Electric Actuators |
| Series | OpenAir GMA |
| Control Type | Proportional / modulating |
| Supply Voltage | 24 VAC ±20%, 50/60 Hz; 24 VDC ±15% |
| Control Input | 0–10 VDC |
| Position Feedback | 0–10 VDC |
| Rated Torque | 62 lb-in (7 N·m) |
| Return Action | Spring return; CW or CCW by mounting orientation |
| Powered Run Time | 90 seconds per 90° |
| Spring-Return Time | 15 seconds typical; temperature-dependent |
| Rotation Range | 90° nominal; 95° maximum |
| Auxiliary Switches | None |
| Electrical Connection | 3-foot (0.9 m), 18 AWG plenum-rated cable |
| Running Power Consumption | 5 VA / 3.5 W |
| Operating Temperature | −25°F to +130°F (−32°C to +55°C) |
| Weight | 2.9 lb (1.3 kg) |
Information About GMA161.1P
The GMA161.1P is part of the Siemens OpenAir GMA series of direct-coupled damper actuators. Its brushless motor and die-cast aluminum housing support operation in building ventilation systems. A self-centering shaft coupling accommodates supported round and square shafts, while manual override assists with setup. This model includes a plenum-rated cable and position feedback but has no auxiliary switches.
Key Features:
- Proportional Input: Responds to a 0–10 VDC command for modulating damper control.
- Position Feedback: Provides a 0–10 VDC signal for monitoring actuator position.
- Spring Return: Returns mechanically following loss of supply power.
- Rated Torque: Delivers 62 lb-in (7 N·m) for damper positioning.
- Brushless Motor: Incorporates stall protection throughout the operating range.
- Direct Coupling: Self-centering clamp connects directly to the damper shaft.
- Manual Override: Allows manual positioning when power is unavailable.
- Plenum-Rated Wiring: Factory-installed cable supports applicable air-handling installations.
The GMA161.1P delivers the reliability and precision required for modulating airflow control in HVAC ventilation systems.
Description
The Siemens GMA161.1P is a proportional electric spring-return actuator for positioning HVAC dampers. It provides 62 lb-in of torque, accepts a 0–10 VDC control signal, and returns mechanically to its configured position when supply power is removed.
Technical Specifications
| Condition | New/Never Used Surplus |
| Brand | Siemens |
| Category | HVAC Controls |
| Part Number | GMA161.1P |
| Subcategory | Electric Actuators |
| Series | OpenAir GMA |
| Control Type | Proportional / modulating |
| Supply Voltage | 24 VAC ±20%, 50/60 Hz; 24 VDC ±15% |
| Control Input | 0–10 VDC |
| Position Feedback | 0–10 VDC |
| Rated Torque | 62 lb-in (7 N·m) |
| Return Action | Spring return; CW or CCW by mounting orientation |
| Powered Run Time | 90 seconds per 90° |
| Spring-Return Time | 15 seconds typical; temperature-dependent |
| Rotation Range | 90° nominal; 95° maximum |
| Auxiliary Switches | None |
| Electrical Connection | 3-foot (0.9 m), 18 AWG plenum-rated cable |
| Running Power Consumption | 5 VA / 3.5 W |
| Operating Temperature | −25°F to +130°F (−32°C to +55°C) |
| Weight | 2.9 lb (1.3 kg) |
Information About GMA161.1P
The GMA161.1P is part of the Siemens OpenAir GMA series of direct-coupled damper actuators. Its brushless motor and die-cast aluminum housing support operation in building ventilation systems. A self-centering shaft coupling accommodates supported round and square shafts, while manual override assists with setup. This model includes a plenum-rated cable and position feedback but has no auxiliary switches.
Key Features:
- Proportional Input: Responds to a 0–10 VDC command for modulating damper control.
- Position Feedback: Provides a 0–10 VDC signal for monitoring actuator position.
- Spring Return: Returns mechanically following loss of supply power.
- Rated Torque: Delivers 62 lb-in (7 N·m) for damper positioning.
- Brushless Motor: Incorporates stall protection throughout the operating range.
- Direct Coupling: Self-centering clamp connects directly to the damper shaft.
- Manual Override: Allows manual positioning when power is unavailable.
- Plenum-Rated Wiring: Factory-installed cable supports applicable air-handling installations.
The GMA161.1P delivers the reliability and precision required for modulating airflow control in HVAC ventilation systems.