Square D PQ4210 100A 240VAC 3-Phase 4-Wire I-Line Fusible Bus Plug Disconnect Switch
- Regular price
- $3,885.00
- Sale price
- $3,885.00
- Regular price
-
Couldn't load pickup availability
Product Description P/N: PQ4210
Description
The Square D PQ4210 is a 100 A fusible bus plug designed for electrical power distribution and circuit protection in compatible I-Line busway systems. Operating at up to 240 VAC, this three-phase, four-wire unit provides a fused disconnect point for commercial and industrial electrical installations. Its plug-in configuration allows electrical loads to be connected to busway distribution systems without requiring separate feeder connections at the main distribution panel.
Technical Specifications
|
Condition |
New/Never Used Surplus |
|
Brand |
Square D (Schneider Electric) |
|
Category |
Electrical Distribution & Protection |
|
Part Number |
PQ4210 |
|
Subcategory |
Fusible Bus Plugs |
|
Product Type |
Fusible Busway Plug-In Unit |
|
Series |
I-Line I / I-Line II |
|
Switch Type |
Type PQ Fusible Disconnect |
|
Rated Current |
100 A |
|
Rated Voltage |
240 VAC |
|
Number of Phases |
3 |
|
Wire Configuration |
4-Wire |
|
Connection Type |
Busway Plug-In |
|
Fuse Classes |
H, K, R (subject to fuse provisions) |
|
Operating Mechanism |
Manual ON/OFF Disconnect |
|
Mounting Orientation |
Horizontal or Vertical Busway |
|
Ground Connection |
Integral Ground Stab Not Included |
|
Replacement Model |
PQ4210G (ground-equipped version; installation compatibility must be checked) |
|
Application |
Industrial and Commercial Electrical Distribution |
|
Weight |
10.00 lb |
Information About PQ4210
The PQ4210 is a Square D Type PQ fusible switch plug-in unit from the I-Line I and I-Line II busway product family. It features a metal enclosure, a manually operated disconnect mechanism, and provisions for installing compatible current-limiting or standard fuses. The unit is designed for three-phase, four-wire electrical distribution and is an older configuration without the integral ground connection provided on later G-suffix models. It can be installed on compatible horizontal or vertical busway runs and is intended for power distribution applications requiring localized circuit isolation and fuse-based overcurrent protection.
Key Features:
-
Fusible Bus Plug Design: Provides fuse-based overcurrent protection and manual disconnection for connected electrical loads.
-
100 A Current Rating: Supports electrical distribution circuits with a maximum rated current of 100 amperes.
-
240 VAC Voltage Rating: Designed for low-voltage AC distribution systems operating at up to 240 volts.
-
Three-Phase Operation: Accommodates three-phase electrical power distribution in commercial and industrial facilities.
-
Four-Wire Configuration: Supports three-phase circuits incorporating a neutral conductor.
-
I-Line Compatibility: Designed for compatible Square D I-Line I and I-Line II busway installations.
-
Type PQ Construction: Uses the Square D PQ series fusible switch plug-in arrangement.
-
Fuse Compatibility: Supports applicable Class H, K, and R fuse configurations, subject to the installed fuse provisions.
-
Manual Disconnect: Incorporates an operating handle for switching connected loads between ON and OFF positions.
-
Plug-In Electrical Connection: Connects directly to compatible busway plug-in openings.
-
Flexible Installation: The 100 A PQ design supports horizontal and vertical busway mounting.
-
Legacy Ground Configuration: Original PQ4210 design does not include the integral ground stab used on the replacement PQ4210G.
The PQ4210 delivers the reliability and precision required for controlled electrical power distribution, localized circuit isolation, and fuse-based protection in compatible industrial and commercial busway systems.
Description
The Square D PQ4210 is a 100 A fusible bus plug designed for electrical power distribution and circuit protection in compatible I-Line busway systems. Operating at up to 240 VAC, this three-phase, four-wire unit provides a fused disconnect point for commercial and industrial electrical installations. Its plug-in configuration allows electrical loads to be connected to busway distribution systems without requiring separate feeder connections at the main distribution panel.
Technical Specifications
|
Condition |
New/Never Used Surplus |
|
Brand |
Square D (Schneider Electric) |
|
Category |
Electrical Distribution & Protection |
|
Part Number |
PQ4210 |
|
Subcategory |
Fusible Bus Plugs |
|
Product Type |
Fusible Busway Plug-In Unit |
|
Series |
I-Line I / I-Line II |
|
Switch Type |
Type PQ Fusible Disconnect |
|
Rated Current |
100 A |
|
Rated Voltage |
240 VAC |
|
Number of Phases |
3 |
|
Wire Configuration |
4-Wire |
|
Connection Type |
Busway Plug-In |
|
Fuse Classes |
H, K, R (subject to fuse provisions) |
|
Operating Mechanism |
Manual ON/OFF Disconnect |
|
Mounting Orientation |
Horizontal or Vertical Busway |
|
Ground Connection |
Integral Ground Stab Not Included |
|
Replacement Model |
PQ4210G (ground-equipped version; installation compatibility must be checked) |
|
Application |
Industrial and Commercial Electrical Distribution |
|
Weight |
10.00 lb |
Information About PQ4210
The PQ4210 is a Square D Type PQ fusible switch plug-in unit from the I-Line I and I-Line II busway product family. It features a metal enclosure, a manually operated disconnect mechanism, and provisions for installing compatible current-limiting or standard fuses. The unit is designed for three-phase, four-wire electrical distribution and is an older configuration without the integral ground connection provided on later G-suffix models. It can be installed on compatible horizontal or vertical busway runs and is intended for power distribution applications requiring localized circuit isolation and fuse-based overcurrent protection.
Key Features:
-
Fusible Bus Plug Design: Provides fuse-based overcurrent protection and manual disconnection for connected electrical loads.
-
100 A Current Rating: Supports electrical distribution circuits with a maximum rated current of 100 amperes.
-
240 VAC Voltage Rating: Designed for low-voltage AC distribution systems operating at up to 240 volts.
-
Three-Phase Operation: Accommodates three-phase electrical power distribution in commercial and industrial facilities.
-
Four-Wire Configuration: Supports three-phase circuits incorporating a neutral conductor.
-
I-Line Compatibility: Designed for compatible Square D I-Line I and I-Line II busway installations.
-
Type PQ Construction: Uses the Square D PQ series fusible switch plug-in arrangement.
-
Fuse Compatibility: Supports applicable Class H, K, and R fuse configurations, subject to the installed fuse provisions.
-
Manual Disconnect: Incorporates an operating handle for switching connected loads between ON and OFF positions.
-
Plug-In Electrical Connection: Connects directly to compatible busway plug-in openings.
-
Flexible Installation: The 100 A PQ design supports horizontal and vertical busway mounting.
-
Legacy Ground Configuration: Original PQ4210 design does not include the integral ground stab used on the replacement PQ4210G.
The PQ4210 delivers the reliability and precision required for controlled electrical power distribution, localized circuit isolation, and fuse-based protection in compatible industrial and commercial busway systems.